Electric lock control board program development

2020-08-28 11:24:56 hongling

Electric lock control board program development


Circuit board development description:


■Performance characteristics:


※ This product effectively combines the advantages of traditional electric locks and electromagnetic locks, and overcomes the deficiencies of excessive noise and power consumption of electromagnetic locks;

※ It is easy to install and use, no need to distinguish the installation direction of the door. It is common for left opening, right opening, inward opening and outward opening;

※ The door closes without collision and automatically locks by induction, which reduces the selection requirements for door closers, solves the problem of door body deformation due to excessive force of the door closer, and extends the service life of the door body;

※ Automatically detect the state of the bolt, and automatically make up the lock if the lock is not in place to ensure safety;

※ Low noise, long life, low power consumption;

※ Multiple opening methods: access control or building intercom signal, remote control, swiping card, key, etc.;

※ Wide voltage 12-18V universal;

※ Prevent unlocking caused by separating the door magnets to ensure safety;

※ Power reverse connection protection, motor short circuit protection, sound and light alarm after Hall element failure;

※ The protruding length of the bolt is ≥20mm, which conforms to the GA/T 73-94 5.1.6 Class B standard;

※ Information feedback output, sound and light prompt.


■Technical parameters:


※ Rated voltage: DC12V±10%

※ Unlock current: <300mA

※ Quiescent current: 16mA

※ Unlock sensitivity: <1S


Welcome to consult: Electric control lock circuit board design Electric control lock circuit board development Electric control lock circuit board development and design Electric control lock circuit board development and production Electric control lock circuit board development plan company