外贸爆款 高频感应加热2500W大功率高频机高频淬火中频炉无抽头

外贸爆款 高频感应加热2500W大功率高频机高频淬火中频炉无抽头

Input voltage: 12V-48 recommended above 36V
Power requirements: less than 12V greater than equal 10A 15V or more greater than equal 20A
Maximum power: 2500W
Maximum current: 50A
The power line is fully covered with copper cover design, which can increase the current and heat generation;
Using oversized and large power heat sink to dissipate heat better;
The output terminal uses three M4 copper columns in parallel, which can be connected to other outputs such as high voltage package;
Using six IRFP260 and 12 capacitors in parallel resonance, the power is high and the efficiency is high;
How to use? (Instructions)
For induction heating, it is recommended to use a switching power supply of 48V50A or higher. If the power supply is 24V or more, a power supply of 20A or more is required. The higher the voltage, the larger the current, the higher the heating power, the faster the heating speed.
size:35*13*10cm
Material:Metal + pc
colour:black
Package Contents:
1 * ZVS induction heater
1 * coil
1 * 48V Copper Tube
1 * water pump
1 * crucible
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.

输入电压:12V-48，

建议高于36V

功率要求:小于12V大于等于10A

15V或大于等于20A

最大功率:2500瓦

最大电流:50A

电源线完全覆盖铜盖设计，

可增加电流和热量的产生；

使用超大功率散热器更好地散热；

输出端使用三个M4铜